Ideally suited for flushing work on house connections.
Optionally, the vehicle can be supplemented with a seeing and flying SCOUT nozzle. The HP-hose-reel is equipped with a rotating mechanism and functions both as a normal flushing hose reel and as a rotating reel for turning the SCOUT nozzle.
HP-hose reels
- HP reels available up to a hose capacity up to approx. 300 m DN 32 or 500 m DN 25
At the boom:
- the boom carries along the high-pressure reel while swivelling
- all hoses directly at the workplace
- clearly visible working position
- comfortable passage height
- short wheelbase, small turning circle
Between drivers cabin and sludge tank:
- short overhang, generous headroom at the rear of the vehicle
- ideally suited in combination with booms with a large working area (e.g. SPACER front)
Tandem-hose-reel
- two jetting reels which can be operated separately, simultaneously or synchronously
- mounted at the boom
- designed for 180 m DN 25 (1″) or 160 m DN 32 (1 1/4″) each or combinable
- ideally suited for two HP-pumps
On the top of the tank:
- in combination with SPECTRO 360° boom
- suction hose and HP reel arranged on the top of the tank in the centre of gravity of the vehicle
- optimal weight distribution, short wheelbase, small turning circle
- flat, compact design
Додатковий барабан, що кріпиться до заднього захисного пристрою (underride guard)
- designed for approx. 300 m DN 38 (1 1/2″)
- for extra-long ranges
- with hose guide, pressure roller, drive and hydraulic connector
- Reel rotation direction electrohydraulically controlled by control panel/radio remote control
Transport reels for suction hoses
- operation by hydraulic motor with multi-disc-brake
- only a transportation reel, no suction can be done through this reel
(suction through the reel on request)
On the side of the vehicle:
- designed for approx. 30 m suction hose DN 75 (3”)
At the boom:
- designed for approx. 15-20 m suction hose DN 75 (3”)
On top of the tank
- arranged horizontally under the suction hose reel
- designed for approx. 30 m suction hose DN 75 (3”)
Tool cabinets
With flaps:
- for one-tank system with a flap, optionally with a hose tray above
- for two-tank system with two flaps on top of each other
- made of aluminium
- With covered gas springs to be fixed in an opened position, lockable
With roller shutters:
- with one or two side by side positioned and lockable roller shutter doors on each side
- available for one- and two-tank-system
Clothes lockers
- with lighting
- foldable clothes rail
- ventilation
- drainage
In pump room / behind pump room doors:
- optionally with heating
Integrated in the vehicle contour:
- arranged at the rear of the vehicle in a low position
- with heating
XXL-Locker:
- suitable for one-tank-system
- high version pulled down between the axles
- with roller shutter
- with heating
Further information on additional equipment for work safety, control units and lighting is available on request.
